Shredding-Crushing Recycling Line

Home

Products

Stable, controllable size reduction — engineered for recycling lines.

Recovery‑friendly output

Screen‑controlled output sizing for smoother washing / granulation feeding.

Uptime mindset

Low wear, easy knife change and maintenance design for continuous operation.

Operational efficiency

Low speed + high torque for stable throughput with lower dust and noise.

Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.

DescriptionThis line combines coarse and fine shredding with downstream recycling in a compact, high-efficiency layout.
It is designed for low energy use, reduced floor-space demand, and simplified maintenance in resource recovery scenarios.

Engineered to stay stable under load

Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.

Low‑speed, high‑torque shearing

Built to stay stable under load and handle mixed feedstock.

Modular cutter design

Knife configurations and wear parts can be tuned to your material.

Hydraulic pusher feeding

Consistent feeding to keep throughput stable.

Dust/noise considerations

Options for dust extraction interfaces and noise reduction.

Built for real feedstock variety

Pick common materials below — we can tune knives, screens and options to match.

Plastics

Rigid plastics, film, purgings. Pre‑shredding for washing / granulation.

E‑waste

Secure size reduction for electronics recycling.

Tyres

Primary size reduction before granulation and separation.

Medical waste

Controlled shredding for compliant downstream processing

Metals

Light metal scrap and mixed materials for pre‑processing.

Industrial waste

Mixed industrial waste to improve handling and logistics.

Pick a model, copy the table

Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.

Model	S600	S800	S1000	S1200	S1400	S1600	S1800
Rotor Diameter (mm)	φ300	φ400/450	φ450	φ450	φ450/520	φ580/630	φ580/630
Rotor width (mm)	600	820	1030	1230	1450	1650	1850
Spindle speed(rpm)	73	73	73	73	73	73	73
Counter knife qty (pcs)	2	2	3	3	4	5	6
Rotor knife qty (pcs)	30/45	34/51	42/63	54/81/108	81/108/132	70/105/140	86/129/172
Motor Power (kW)	22	37/45	55	75	90	75×2	90×2
Hydraulic drive capacity (kW)	5.5	5.5	5.5	5.5	7.5	7.5	7.5
L×W×HDimension(mm)	1780×1400×1900	2400×1800×2500	2800×2000×2800	3350×2350×3000	3350×2600×3000	3800×3400×3600	4100×3400×3600
Weight (kg)	2800	3700	5000	6800	8300	11000	14000

Configure around your site constraints

We configure the machine around your material, layout, power and compliance constraints.

Screen sizes

Different screen openings
Quick‑change screen options (if required)

Discharge

Belt discharge
Screw discharge
Air conveying (if required)

Cooling

Rotor / gearbox cooling options for harsh duty

Feeding

Hydraulic pusher feeding
Infeed conveyor / hopper options

Controls

PLC / HMI
Remote diagnosis interface (optional)

Reduce project risk

We support selection, delivery and long‑term operation.

Lead time

We confirm lead time after your configuration and destination country.

Installation

Installation guidance, commissioning and operator training support.

Training

Remote + on‑site training options for operators and maintenance team.

Spare parts

Knife sets, screens (if applicable) and critical spares supply.

Reduce project risk

Material

Mixed plastics (rigid + film)

Target

Stable size reduction for washing line feeding

Configuration

Single Shaft Shredder – S Series + conveyor + screen selection

Result

More stable downstream throughput and easier operation

Common questions

How do I choose the right model?

Share your feedstock, throughput target, output size and site constraints. We will recommend a feasible model range and configuration.

Can output size be controlled?

Yes. Depending on the machine type, output is controlled by screen size and knife configuration, or by cutter profile and downstream secondary crushing.

What affects throughput the most?

Material type, feeding method, required output size, knife design and operating hours. Provide details and we will estimate a realistic range.

Do you support overseas delivery?

Yes. We ship globally and support overseas projects with remote and on‑site service depending on schedule and location.

What information do you need for a quote?

Material, throughput, output size, contamination/moisture, power/space constraints and destination country.

Common questions

Send material details, throughput target and output size — we’ll respond with
a configuration recommendation.