Double Rotor Shredder – T Series

Home

Products

Stable throughput for challenging feedstock — built to reduce wear.

Stable continuous throughput

Optimized rotor design for consistent processing.

Wear‑reduction design

Even cutter distribution to reduce wear and dust.

Line‑ready integration

Matches washing / separation / RDF downstream processes.

Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.

Engineered to stay stable under load

Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.

Strong tearing action

Designed for challenging materials and mixed feedstock.

Even cutter distribution

Better wear balance and longer service life.

Dust control ready

Interfaces for dust extraction and site compliance.

Configurable discharge

Supports different discharge/feeding layouts.

Built for real feedstock variety

Pick common materials below — we can tune knives, screens and options to match.

Industrial waste

Stable size reduction for mixed industrial waste.

Plastics

Rigid plastics and thick parts in recycling lines.

Used cables

Pre‑processing before separation.

RDF prep

Consistent pre‑processing for RDF applications.

Wood pallets

Bulky wood waste size reduction.

Confidential documents

Secure, stable shredding for compliance.

Pick a model, copy the table

Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.

Model	T800	T1000	T1200	T1600
Rotor Diameter (mm)	φ420	φ420	φ420	φ420
Rotor width (mm)	800	1000	1200	1600
Spindle speed(rpm)	38	38	38	38
Counter knife qty (pcs)	4	6	8	8
Rotor knife qty (pcs)	72	96	112	144
Motor Power (kW)	37×2	55×2	75×2	90×2
Hydraulic drive capacity (kW)	1.5	1.5	1.5	1.5
Screen opening(mm)	>30	>30	>30	>30
L×W×HDimension(mm)	3000×1750×2700	3200×1750×2700	3500×1750×2700	5000×1900×2700
Weight (kg)	5000	7000	9500	15000

Configure around your site constraints

We configure the machine around your material, layout, power and compliance constraints.

Feeding

Conveyor / hopper options
Anti‑bridging design (optional)

Discharge

Conveyor discharge
Air conveying interface (optional)

Controls

PLC / HMI
Automation integration

Dust/noise

Dust extraction ports
Noise reduction enclosure options

Reduce project risk

We support selection, delivery and long‑term operation.

Lead time

We confirm lead time after your configuration and destination country.

Installation

Installation guidance, commissioning and operator training support.

Training

Remote + on‑site training options for operators and maintenance team.

Spare parts

Knife sets, screens (if applicable) and critical spares supply.

Reduce project risk

Material

Mixed plastics (rigid + film)

Target

Stable size reduction for washing line feeding

Configuration

Single Shaft Shredder – S Series + conveyor + screen selection

Result

More stable downstream throughput and easier operation

Common questions

How do I choose the right model?

Share your feedstock, throughput target, output size and site constraints. We will recommend a feasible model range and configuration.

Can output size be controlled?

Yes. Depending on the machine type, output is controlled by screen size and knife configuration, or by cutter profile and downstream secondary crushing.

What affects throughput the most?

Material type, feeding method, required output size, knife design and operating hours. Provide details and we will estimate a realistic range.

Do you support overseas delivery?

Yes. We ship globally and support overseas projects with remote and on‑site service depending on schedule and location.

What information do you need for a quote?

Material, throughput, output size, contamination/moisture, power/space constraints and destination country.

Common questions

Send material details, throughput target and output size — we’ll respond with
a configuration recommendation.